 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 10 mm (0.40 inch) Seven Segment Displays Technical Data HDSP-F15x Series HDSP-F16x Series HDSP-F20x Series HDSP-F30x Series HDSP-F40x Series HDSP-F50x Series HDSP-G00x Series HDSP-G15x Series HDSP-G20x Series HDSP-G30x Series HDSP-G40x Series HDSP-G50x Series Features * Industry Standard Size * Industry Standard Pinout 7.6 mm (0.3 inch) DIP Single 15.24 mm (0.6 inch) DIP Dual Leads on 2.54 mm (0.1 inch) Centers * Choice of Colors AlGaAs Red, High Efficiency Red, Orange, Yellow, Green * Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast Black Surface and Color Tinted Epoxy (HDSP-F161 only) 50 Viewing Angle * Design Flexibility Common Anode or Common Cathode Single and Dual Digits Right Hand Decimal Point 1. Overflow Character * Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display * High Light Output * High Peak Current * Excellent for Long Digit String Multiplexing * Intensity and Color Selection Option * Sunlight Viewable AlGaAs Devices AlGaAs Red[1] HDSPF151 F161 F153 F157 F158 G151 G153 F203 F207 F208 G201 G203 F403 F407 F408 G401 G403 F303 F307 F308 G301 G303 F503 F507 F508 G501 G503 HER HDSPF201 Orange HDSPF401 Yellow HDSPF301 Green HDSPF501 Description Common Anode Right Hand Decimal Common Anode Right Hand Decimal Common Cathode Right Hand Decimal Common Anode 1. Overflow Common Cathode 1. Overflow Two Digit Common Anode Right Hand Decimal Two Digit Common Cathode Right Hand Decimal Package Drawing A A B C D E F Note: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-F10X data sheet for low current operation. 2 Part Numbering System 5 0 8 2 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options[1] 00: No mechanical option 16: Special dimensional tolerances Color Bin Options[1,2] 0: No color bin limitation Maximum Intensity Bin[1,2] 0: No maximum intensity bin limitation Minimum Intensity Bin[1,2] 0: No minimum intensity bin limitation Device Configuration/Color[1] 1: Common Anode 3: Common Cathode Device Specific Configuration[1] Refer to respective data sheet Package[1] F: 10 mm (0.4 inch) Single Digit Seven Segment Display G: 10 mm (0.4 inch) Dual Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information. Description The 10 mm (0.40 inch) LED seven segment displays are Agilent's most space-efficient character size. They are designed for viewing distances up to 4.5 metres (15 feet). These devices use an industry standard size package and pinout. The dual numeric, single numeric, and 1. overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode. Typical applications include instruments, point of sale terminals, and appliances. 3 Package Dimensions 4 Internal Circuit Diagram FUNCTION PIN 1 2 3 4 5 6 FUNCTION PIN 1 2 3 4 5 6 7 8 9 10 A ANODE[1] CATHODE f CATHODE g CATHODE e CATHODE d ANODE[1] CATHODE DP CATHODE c CATHODE b CATHODE a B CATHODE[2] ANODE f ANODE g ANODE e ANODE d CATHODE[2] ANODE DP ANODE c ANODE b ANODE a C ANODE[1] CATHODE PLUS CATHODE MINUS NC NC ANODE[1] CATHODE DP CATHODE c CATHODE b NC D CATHODE[2] ANODE PLUS ANODE MINUS NC NC CATHODE[2] ANODE DP ANODE c ANODE b NC 7 8 9 10 11 12 13 14 15 16 17 18 E E CATHODE NO. 1 D CATHODE NO. 1 C CATHODE NO. 1 DP CATHODE NO. 1 E CATHODE NO. 2 D CATHODE NO. 2 G CATHODE NO. 2 C CATHODE NO. 2 CP CATHODE NO. 2 B CATHODE NO. 2 A CATHODE NO. 2 F CATHODE NO. 2 DIGIT NO. 2 ANODE DIGIT NO. 1 ANODE B CATHODE NO. 1 A CATHODE NO. 1 G CATHODE NO. 1 F CATHODE NO. 1 F E ANODE NO. 1 D ANODE NO. 1 C ANODE NO. 1 DP ANODE NO. 1 E ANODE NO. 2 D ANODE NO. 2 G ANODE NO. 2 C ANODE NO. 2 DP ANODE NO. 2 B ANODE NO. 2 A ANODE NO. 2 F ANODE NO. 2 DIGIT NO. 2 CATHODE DIGIT NO. 1 CATHODE B ANODE NO. 1 A ANODE NO. 1 G ANODE NO. 1 F ANODE NO. 1 NOTES: 1. REDUNDANT ANODES 2. REDUNDANT CATHODES HOLE PATTERN FOR PCB LAYOUT TO ACHIEVE UNIFORM 0.450 IN. DIGIT TO DIGIT PITCH. FOR HDSP-FXXX TO HDSP-GXXX. 5 Absolute Maximum Ratings AlGaAs Red HDSPF15x/F16x G15x Series 96 160[1] 40[2] -20 to +100[9] HER/Orange HDSPF20x/G20x/ G40x Series 105 90[3] 30[4] Yellow HDSPF30x/G30x Series 80 60[5] 20[6] -40 to +100 -55 to +100 3.0 250 Green HDSPF50x/G50x Series 105 90[7] 30[8] Description Average Power per Segment or DP Peak Forward Current per Segment or DP DC Forward Current per Segment or DP Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wavesoldering Temperature for 3 Seconds (1.59 mm [0.063 in.] below body) Notes: 1. See Figure 1 to establish pulsed conditions. 2. Derate above 46C at 0.54 mA/C. 3. See Figure 6 to establish pulsed conditions. 4. Derate above 53C at 0.45 mA/C. 5. See Figure 7 to establish pulsed conditions. Units mW mA mA C C V C 6. 7. 8. 9. Derate above 81C at 0.52 mA/C. See Figure 8 to establish pulsed conditions. Derate above 39C at 0.37 mA/C. For operation below -20C, contact your local Agilent components sales office or an authorized distributor. Electrical/Optical Characteristics at TA = 25C AlGaAs Red Device Series Parameter Luminous Intensity/Segment[1, 2, 5] (Digit Average) Forward Voltage/Segment or DP HDSPF15x/ F16x/ G15x Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] Temperature Coefficient of VF /Segment or DP Thermal Resistance LED Junction-to-Pin Symbol IV Min. 7.5 Typ. 15.0 Max. Units mcd Test Conditions IF = 20 mA VF PEAK d VR VF /C 3.0 1.8 645 637 15 -2 2.2 V nm nm V mV/C C/W/Seg IF = 20 mA IR = 100 A RJ-PIN 320 6 Electrical/Optical Characteristics at TA = 25C, continued High Efficiency Red Device Series Parameter Luminous Intensity/Segment[1,2] (Digit Average) Forward Voltage/Segment or DP HDSPF20x/ G20x Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] Temperature Coefficient of VF /Segment or DP Thermal Resistance LED Junction-to-Pin Symbol IV Min. 420 Typ. 1200 Max. Units cd Test Conditions IF = 5 mA VF PEAK d VR VF /C 3.0 2.0 635 626 30 -2 2.5 V nm nm V mV/C C/W/Seg IF = 20 mA IR = 100 A RJ-PIN 320 Orange Device Series Parameter Luminous Intensity/Segment[1,2] (Digit Average) Forward Voltage/Segment or DP HDSPF40x/ G40x Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] Temperature Coefficient of VF/Segment or DP Thermal Resistance LED Junction-to-Pin Symbol IV Min. 420 Typ. 1200 Max. Units cd Test Conditions IF = 5 mA VF lPEAK ld VR VF/C 3.0 2.0 600 603 30 -2 2.5 V nm nm V mV/C IF = 20 mA IR = 100 A Rl\qJ-PIN 320 C/W/Seg 7 Electrical/Optical Characteristics at TA = 25C, continued Yellow Device Series Parameter Luminous Intensity/Segment[1,2] (Digit Average) Forward Voltage/Segment or DP HDSPF30x/ G30x Peak Wavelength Dominant Wavelength[3,6] Reverse Voltage/Segment or DP[4] Temperature Coefficient of VF /Segment or DP Thermal Resistance LED Junction-to-Pin Symbol Min. 290 IV VF PEAK d VR VF /C 581.5 3.0 2.2 583 586 40 -2 592.5 2.5 V nm nm V mV/C C/W/Seg IR = 100 A IF = 20 mA Typ. 800 Max. Units cd Test Conditions IF = 5 mA RJ-PIN 320 High Performance Green Device Series Parameter Luminous Intensity/Segment[1,2] (Digit Average) Forward Voltage/Segment or DP HDSPF50x/ G50x Peak Wavelength Dominant Wavelength[3,6] Reverse Voltage/Segment or DP[4] Temperature Coefficient of VF /Segment or DP Thermal Resistance LED Junction-to-Pin Symbol IV Min. 1030 Typ. 3500 Max. Units cd Test Conditions IF = 10 mA VF PEAK d VR VF /C 3.0 2.1 566 571 50 -2 2.5 V nm IF = 10 mA 577 nm V mV/C C/W/Seg IR = 100 A RJ-PIN 320 Notes: 1. Case temperature of device immediately prior to the intensity measurement is 25C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-F15X/F16x/G15X series. 6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 8 AlGaAs Red Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration - AlGaAs Red. IDC MAX. - MAXIMUM DC CURRENT PER SEGMENT - mA 45 AlGaAs RED 40 35 30 25 20 15 10 5 0 20 30 40 50 60 70 RJ-A = 770C/W IF - FORWARD CURRENT PER SEGMENT - mA 50 160 140 120 AlGaAs RED 100 80 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VF - FORWARD VOLTAGE - V 80 90 100 110 120 TA - AMBIENT TEMPERATURE - C Figure 2. Maximum Allowable DC Current vs. Ambient Temperature. Figure 3. Forward Current vs. Forward Voltage. RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 1.75 1.50 1.25 1.00 AlGaAs RED 0.75 0.50 0.25 0 0 5 10 15 20 25 30 35 40 IF - FORWARD CURRENT PER SEGMENT - mA PEAK - NORMALIZED RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 20 mA) 2.00 1.4 1.2 1.0 0.8 AlGaAs RED 0.6 0.5 1.0 2.0 5.0 10.0 20.0 50.0 150.0 30.0 100.0 3.0 500.0 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 4. Relative Luminous Intensity vs. DC Forward Current. Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 9 HER, Orange, Yellow, Green Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration - HER, Orange. Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration - Yellow. Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration - Green. Figure 9. Maximum Allowable DC Current vs. Ambient Temperature. Figure 10. Forward Current vs. Forward Voltage Characteristics. Figure 11. Relative Luminous Intensity vs. DC Forward Current. Figure 12. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 10 Intensity Bin Limits (mcd) AlGaAs Red HDSP-F15x/F16x/G15x IV Bin Category Min. L 8.67 M 13.00 N 19.50 O 29.30 P 43.90 Max. 15.90 23.80 35.80 53.60 80.50 Color Categories Color Yellow Bin 1 3 2 4 2 3 4 5 Dominant Wavelength (nm) Min. Max. 581.50 585.00 584.00 587.50 586.50 590.00 589.00 592.50 573.00 577.00 570.00 574.00 567.00 571.00 564.00 568.00 Green HER/Orange HDSP-F20x/G20x/F40x/G40x IV Bin Category Min. Max. C 0.485 0.890 D 0.728 1.333 E 1.091 2.000 F 1.636 3.000 G 2.454 4.500 H 3.682 6.751 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representatives for further clarification/information. Yellow HDSP-F30x/G30x IV Bin Category Min. C 0.297 D 0.445 E 0.669 F 1.003 G 1.504 H 2.256 Contrast Enhancement Max. 0.543 0.817 1.225 1.838 2.758 4.137 For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For further information on soldering LEDs, please refer to Application Note 1027. Green IV Bin Category H I J K L HDSP-F50x/G50x Min. 1.54 2.31 3.46 5.18 7.78 Max. 2.82 4.23 6.34 9.50 14.26 11 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2005 Agilent Technologies, Inc. Obsoletes 5988-2222EN February 2, 2005 5989-2346EN |
Price & Availability of HDSP-F201-00000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |